Procedure to modify Payouts for Standard MC700-CC token changer

Procedure to modify Payouts for Standard MC700-CC token changer for Sea Quest

1. A.    The new payouts are to be $20 bill = 12 Tokens.
2. B.     Credit Card Payouts will be: Button #1 is $80= 60 Tokens, Button #2 is $60= 40 Tokens, Button #3 is $40 = 25 Tokens, Button #4  is $25= 15 Tokens.
3. 1.     Keep pressing the right arrow on the EF module & stop at “Bills Accepted Settings” then keep pressing the down arrow answering Yes to $20 and No to all other Bill denomination settings.
4. 2.     Touch “Exit” & keep pressing the left arrow stopping at “Bill Vend Settings”. Then, pressing the down arrow and after $20, clear the present payout. Enter new Payout of 12 tokens.
5. 3.     Touch “Exit” & keep pressing the left arrow, stop at “Selectable Vend Settings”. Then pressing the down arrow, answer the questions for button 1,2,3 & 4. Press the “clear button” to remove the old number of tokens and key in the new number of tokens based on the combinations below.

For Example, Button #1 is for $80 for 60. Button #2 is for $60 for 40 tokens. Button #3 is for $40 for 25 tokens. Button #4 is for $25 for 15 tokens.

1. 4.     Press Exit 2 times to see “Main Menu”.  Programming is now complete.
2. 5.     Do a test dispense using a $20 bill and the test credit card for an $80, $60, $40 & $25 credit card swipe. Count the tokens after each dispense for correctness. Immediately, I suggest calling Nayax at 410-666-3800, giving Nayax the Nayax serial number off the rear of the swipe reader and explain that 4 test vends for $80, $60, $40 & $ 25 were done by management and request a credit for the $205.